Representative Steve LaTourette

It is important that we participate in the political process. Too many Americans do not. The strength and vitality of our representative democracy depends on substantial participation by the voters.

Steve LaTourette has represented the 14th congressional district in Ohio for the past 16 years. He has made significant contributions for both the country and district. Steve understands how Washington works, while not losing touch with those he represents. I support him for re-election.

Recently we had a fund raiser for Steve in Ashtabula. In the photo, I am introducing the Congressman to a group of interested citizens. His remarks and answers to our questions are very helpful for understanding and participating in the political process.

The American Wind Energy Association (AWEA)

In May of this year, MFG participated in the annual AWEA (American Wind Energy Assoc.) meeting, which was held this year in Dallas, TX. Approximately 25,000 wind energy professionals gathered for education and networking.

We displayed our products and services in a 20 x 20 booth. Centered in our booth was a spinner for a 1.5MW turbine. We also had our service company, Wind Energy Servies, (www.windenergyservicesusa.com)

well reprsented (see photo at right).

MFG beleives that renewable energy, made in America, is vital to our country's long term economic well being and our national security. We have been producing wind blades since the 1980's, and continue to do so in our blade plants in TX and SD.

At the left are two Teammates that are very important to our wind energy program. To my right (I am the short guy in the middle) is Carl LaFrance, our wind energy champion. To my left is Dave Denny, our Executive Vice President

Carl and Dave enjoy the challenges of wind and are first rate Teammates.

BTW, our MFG wind energy ties were very popular.

The JEC

In mid -April, I travelled to Paris, France to attend the annual JEC Composites exhibition and convention. The JEC is the largest show in the world focusing on composites suppliers and users, as well as those interested in learning about composites.

JEC Composites is very well run by Ms. Frederique Mutel and her talented team. Over 30,000 people attended JEC 2010. I was privileged to be this year's Honorary Chairman. The photo at the left was taken during my presentation to the media. I spoke of the history of MFG and what we are doing now. I am grateful to the JEC for this opportunity and honor. The only negative about this wonderful trip was being caught by the volcano. Five extra days in Paris. Great city in which to be grounded.

www.jeccomposites.com

The Volcano!

In early April, 2010, I flew to Paris, France to attend the Joint Economic Composites Conference, more commonly know as the JEC. It was a five day trip that took 10 days. The Iceland volcano (with the huge and complicated name) blew the day before departure, stranding thousands in Europe. Fortunately, I was in Paris and was able to remain in my hotel for an extra five days. Many others were not as fortunate.

Signing the blade!

General Electric is promoting wind energy with an interesting program entitled "Capture the Wind". The project started in Aberdeen, SD, with a dedication ceremony and a parade through town of a GE 40 meter blade, manufactured by MFG South Dakota. Both young and old citizens (and those in the middle) are asked to "sign" the blade indicating their support for renewable energy. The blade, transported on a huge trailer, and hauled by a beautiful Peterbilt tractor, wound its way through the midwest with stops at several cities. The blade eventually arrived in Dallas, TX, and was parked in front of the Dallas Convention Center, where inside the American Wind Energy Association was holding its annual convention. The photo on the left records my support and signing of the blade. Here's to renewable energy, made in America!

a beautiful Gypsy!

Here is a photo of a 1974 MFG boat! It is a "Gypsy" model and is in original and beatiful condition. The boat was made by MFG in Union City, PA, and I happend to be General Manager at that time.

Many thanks to Ken Ralyon for sending us the photo. Great job, Ken. Bringing back some nice memories. 35 years old never looked so good!

Mt Hood

Here is a photo of Mt Hood (from the north), that I snapped from an airplane. This is a beautiful mountain that sits 50 miles east of Portland, OR. By mountaineeeing standards, Hood is a short, relatively easy climb. By my standards, it was pretty tough! Several years ago my daughter Hilary and I, along with two nephews, hired guides and made the summit. The last part was steep, about 40 degress, but the sense on top was well worth the effort.
Hiking in the mountains is great therapy, something we could all use from time to time.

a beautiful new truck manufacturing plant

One of the most interesting aspects of being a manufacturer that supplies to Original Equipment Manufacturers (OEM's), is that we visit our customers, both at their purchasing/engineering offices, and at their manufacturing plants. Many of these manufacturing plants are very impressive and interesting. For example, the Corvette assembly plant in Bowling Green, KY, is very stimulating to see. Another very impressive plant is the new Daimler Truck plant located in Saltillo, MX. This plant is over 1.2 million square feet, and contains the latest in truck manufacturing equipment and technology. MFG supplies composites parts to Saltillo as well as DTNA plants in Oregon, North Carolina, and South Carolina.

In the photo above, I have the privilege of standing by Mark Hernandez, Plant Manager. We are quite impressed with Mark and his Team!

A beautiful truck (and hood)!

MFG, in addition to manufacturing automotive parts, has for decades produced composite parts and assemblies for the world's leading truck manufacturers. The photo at the left shows a Daimler class 6/7 truck, displayed in DTNA's North American headquarters (Portland, OR). It is a beautiful and successful truck and possesses a composite hood using MFG's unique PRIME process. The hood is molded and assembled in MFG's North Carolina facility, and is shipped to DTNA truck assembly plants in NC and Mexico.

Admittedly, I am a little partial, but if I may, this is one of the most beautiful truck hoods anywhere. Certainly to me, and hopefully to the many thousands of customers who drive this outstanding vehicle.