...the joy of music

Ever since I can remember, I have always liked good music, especially the opera. Where this love came from, I don't know.

Fortunately, my music teachers tolerated my interest and took my to Cleveland to hear the Cleveland Orchestra (Beethoven's Ninth!) and the opera, especially when The Met would come to town for a week. People sometimes ask, "what is your favorite opera" to which I can only answer, "the one I am listining to now". However, I confess to being overwhelmed by "Der Ring des Nibelungen" by Richard Wagner. Recommend it highly to opera lovers. The photo is me about 14 conducting a piece in our living room. Enjoy the Music!

Going to the gym

In 1976 I decided to get back into shape. After 6 months of cardio training, I lost 60 pounds and ran my first marathon in Erie, PA. I was fortunate to complete 33 marathons, the last being Long Beach, CA in 1991.

In the late 1980's, I started going to the gym, mainly lifting weights. At the left is a photo of about 5 years ago. At that time, I had pumped my muscles up to an uncomfortable size.

My message here is to encourage everyone to pariticipate in some form of exercise, appropriate for you. For many, this might be brisk walking. Others might like swimming, biking, or playing ball with your children. A gym is not necessary for exercise. However, I find it motivating to be in an environment where people are exercising and having fun.

Representative Steve LaTourette

It is important that we participate in the political process. Too many Americans do not. The strength and vitality of our representative democracy depends on substantial participation by the voters.

Steve LaTourette has represented the 14th congressional district in Ohio for the past 16 years. He has made significant contributions for both the country and district. Steve understands how Washington works, while not losing touch with those he represents. I support him for re-election.

Recently we had a fund raiser for Steve in Ashtabula. In the photo, I am introducing the Congressman to a group of interested citizens. His remarks and answers to our questions are very helpful for understanding and participating in the political process.

The American Wind Energy Association (AWEA)

In May of this year, MFG participated in the annual AWEA (American Wind Energy Assoc.) meeting, which was held this year in Dallas, TX. Approximately 25,000 wind energy professionals gathered for education and networking.

We displayed our products and services in a 20 x 20 booth. Centered in our booth was a spinner for a 1.5MW turbine. We also had our service company, Wind Energy Servies, (www.windenergyservicesusa.com)

well reprsented (see photo at right).

MFG beleives that renewable energy, made in America, is vital to our country's long term economic well being and our national security. We have been producing wind blades since the 1980's, and continue to do so in our blade plants in TX and SD.

At the left are two Teammates that are very important to our wind energy program. To my right (I am the short guy in the middle) is Carl LaFrance, our wind energy champion. To my left is Dave Denny, our Executive Vice President

Carl and Dave enjoy the challenges of wind and are first rate Teammates.

BTW, our MFG wind energy ties were very popular.

The JEC

In mid -April, I travelled to Paris, France to attend the annual JEC Composites exhibition and convention. The JEC is the largest show in the world focusing on composites suppliers and users, as well as those interested in learning about composites.

JEC Composites is very well run by Ms. Frederique Mutel and her talented team. Over 30,000 people attended JEC 2010. I was privileged to be this year's Honorary Chairman. The photo at the left was taken during my presentation to the media. I spoke of the history of MFG and what we are doing now. I am grateful to the JEC for this opportunity and honor. The only negative about this wonderful trip was being caught by the volcano. Five extra days in Paris. Great city in which to be grounded.

www.jeccomposites.com

The Volcano!

In early April, 2010, I flew to Paris, France to attend the Joint Economic Composites Conference, more commonly know as the JEC. It was a five day trip that took 10 days. The Iceland volcano (with the huge and complicated name) blew the day before departure, stranding thousands in Europe. Fortunately, I was in Paris and was able to remain in my hotel for an extra five days. Many others were not as fortunate.

Signing the blade!

General Electric is promoting wind energy with an interesting program entitled "Capture the Wind". The project started in Aberdeen, SD, with a dedication ceremony and a parade through town of a GE 40 meter blade, manufactured by MFG South Dakota. Both young and old citizens (and those in the middle) are asked to "sign" the blade indicating their support for renewable energy. The blade, transported on a huge trailer, and hauled by a beautiful Peterbilt tractor, wound its way through the midwest with stops at several cities. The blade eventually arrived in Dallas, TX, and was parked in front of the Dallas Convention Center, where inside the American Wind Energy Association was holding its annual convention. The photo on the left records my support and signing of the blade. Here's to renewable energy, made in America!

a beautiful Gypsy!

Here is a photo of a 1974 MFG boat! It is a "Gypsy" model and is in original and beatiful condition. The boat was made by MFG in Union City, PA, and I happend to be General Manager at that time.

Many thanks to Ken Ralyon for sending us the photo. Great job, Ken. Bringing back some nice memories. 35 years old never looked so good!

Mt Hood

Here is a photo of Mt Hood (from the north), that I snapped from an airplane. This is a beautiful mountain that sits 50 miles east of Portland, OR. By mountaineeeing standards, Hood is a short, relatively easy climb. By my standards, it was pretty tough! Several years ago my daughter Hilary and I, along with two nephews, hired guides and made the summit. The last part was steep, about 40 degress, but the sense on top was well worth the effort.
Hiking in the mountains is great therapy, something we could all use from time to time.

a beautiful new truck manufacturing plant

One of the most interesting aspects of being a manufacturer that supplies to Original Equipment Manufacturers (OEM's), is that we visit our customers, both at their purchasing/engineering offices, and at their manufacturing plants. Many of these manufacturing plants are very impressive and interesting. For example, the Corvette assembly plant in Bowling Green, KY, is very stimulating to see. Another very impressive plant is the new Daimler Truck plant located in Saltillo, MX. This plant is over 1.2 million square feet, and contains the latest in truck manufacturing equipment and technology. MFG supplies composites parts to Saltillo as well as DTNA plants in Oregon, North Carolina, and South Carolina.

In the photo above, I have the privilege of standing by Mark Hernandez, Plant Manager. We are quite impressed with Mark and his Team!

A beautiful truck (and hood)!

MFG, in addition to manufacturing automotive parts, has for decades produced composite parts and assemblies for the world's leading truck manufacturers. The photo at the left shows a Daimler class 6/7 truck, displayed in DTNA's North American headquarters (Portland, OR). It is a beautiful and successful truck and possesses a composite hood using MFG's unique PRIME process. The hood is molded and assembled in MFG's North Carolina facility, and is shipped to DTNA truck assembly plants in NC and Mexico.

Admittedly, I am a little partial, but if I may, this is one of the most beautiful truck hoods anywhere. Certainly to me, and hopefully to the many thousands of customers who drive this outstanding vehicle.

Hollywood goes to Ashtabula

We have recently made two DVD's, one describing our new materials entity,"iCOM", and the other introducing our new commercial process, named "PRIME". Both of these DVD's were written, directed, and produced by Media Magic Productions of Jeffersson, OH. Much of the video was shot in Ashtabula, and the remainder shot in Linesville, PA, and Morganton, NC.

Producing a quality DVD demands the dilgent work of professionals, plus the "work" of amateurs, who must do their lines over and over. One of these amateurs is shown rehearsing in the photo on the left.

We wore makeup! Hollywood look out.

The most beautiful fiber glass boat in the world!

To me, at least. Here is a photo of a 15 foot MFG boat still in operation and in great condition. The photo was sent to us by its owner in the Buffalo, NY area. This fiber glass beauty is over 50 years old!

MFG pioneered fiber glass boats beginning in 1955. While we no longer make boats, the use of fiber glass reinforced plastic still remains the main stream material for boat building throughout the world.

My Running Career

In March, 1976, I decided that I was not in good shape physically, so I took up running. At first I could not run a half mile, but I kept working at it. I remember the painful shin splints, and waking up stiff as an over-starched shirt.

In September of that year, I entered the Presque Isle Marathon and completed the 26.2 mile course in 3 hours and 33 minutes. I was delighted and somewhat amazed that I could run that far. The next few days were very painful, particularly going down stairs.

As you can see from the photo, lots of running can help you lose lots of pounds! I lost 50 pounds in the process, and Mom was convinced that I was starving. During my "running career", I completed 33 marathons, including New York City and Los Angeles, and managed to run a few 50 milers as well. Met lots of nice people and ate lots of good pasta!

MFG Boat 20th Anniversary

In 1975, the MFG Boat Company celebrated its 20th year of producing and selling MFG Boats. At that time our most popular model was a 15-ft bowrider, named the Gypsy 15. It was quite a different boat than the original lapstrake hull boats that we produced in our inaugural year of 1955.

In the photo, we see Dick Russell, sales manager of MFG Boats. Robert Morrison, founder of MFG, is getting a 20year plaque from me (the one wearing that awful sport coat and the mustache!) Lots of good people made good boats in Union City for thousands of customers that enjoyed lots of boating fun. Great memories!

MFG Galileo Dedication

On September 29, 2009, members of the MFG management team gathered in Opp, Alabama, where we participated in the dedication of MFG Galileo, which has relocated to Opp from Reno, NV. The weather was beautiful and the dedication was enjoyed by all who attended.

Representing MFG from Ashtabula, OH were Nancy Warner (board member), Glen Warner (VP of special projects), Larry Davis (VP of human resources), Eric Hutchinson (sr accountant), Kurt Fink (marketing director), John O'Neil,Sr (IT director), Randy Rudecki (IT teammate) and me.

Clint Lackey, the general manager of MFG Galileo, several teammates from Galileo, as well as teammates from MFG Alabama (just down the road 2 miles) and family members participated in the opening event.

Mayor H. D. Edgar and several local officials participated in the ceremony and provided the catered southern styled lunch. After remarks from several individuals, we held the ribbon cutting ceremony (shown in photo). Mayor Edgar cut the ribbon as he and the City of Opp welcomed MFG Galileo to its new home.

MFG is delighted to be in Opp (for the second time). In 2005 , we dedicated MFG Alabama, making two entities now in this business-friendly town. Here's to Galileo!

Ted Williams

On June 21, 1973, Ted Williams, arguably one of the greatest hitters of all time, came to Union City to present an award to our Union City teammates celebrating the production of the 100,000th Gamefisher 12-ft fishing boat.

Beginning in the late 60's, MFG began producing fiber glass boats for Sears under the Ted Williams brand name. The Gamefisher was a big success, and we produced over 200,000 boats for Sears by the end of '79.

Ted Williams was a very interesting man. We hosted him at the Aviation Club in Erie, where Ted gave a batting lesson witnessed by all the guests and the staff. That was quite the moment! I was fortunate to spend an entire day with him on June 22nd. He really liked Presque Isle Bay in Erie and spoke of his passion for all types of fishing. We walked around my house in Erie and he could name every plant and bush in Latin! That night we went to the horse races, where he graciously signed autographs and chatted with fans.

The photo above shows Robert Morrison (what a jacket!) and me, flanking one of the most famous hitters of the baseball ever. A great moment to remember and share.

Larry Pitt---Teammate and Friend

Larry Pitt, a highly valued MFG teammate and a personal friend, passed away suddenly on July 31, quite a shock to many who knew him well.

Larry started his 47-year career with MFG in October, 1962. His hard work and dedication led Larry through many positions at MFG, including plant manager of our Ashtabula manufacturing facility - which was MFG's largest entity at that time. Although a tough taskmaster, he was admired and respected by those who worked with him.

Larry's wife Beverly worked at MFG for many years as a production supervisor, and several other relatives were MFG teammates as well. Helen Pitt, one of Larry and Beverly's children, now supervises our material compounding department (iCOM), which her dad supervised for many years in the 70's and 80's. Like father, like daughter!

Larry was a great guy, a "salt-of-the earth" man, who was fun to be with and someone you could always count on.

We miss you, Larry, but your legacy lives on.

..the first MFG Boats

For the 1955 model year, MFG introduced three 15-foot models. They were named the Union, the Cambridge, and the Erie - after Union City, PA; Cambridge Springs, PA; and Erie, PA, the latter two close to Union City. The Union was the basic model with steering from the transom, and retailed for $295! The Cambridge had a split console amidships with cable steering, and retailed for $495. The Erie was the fancy model and sold for $695. All models had the same fiber glass reinforced plastic hull, initially made in Ashtabula, OH, and subsequently in Union City, PA.

This was a watershed event for the marine industry. The FRP boat was a big hit with boaters!

By the early '60's, most of the small boat manufacturers had switched to FRP. Those who chose not to, well - they missed "the boat"!

..The early Covettes Part 3

Union City, is a small town approximately 25 miles south of Erie, in northwestern PA. During the 20th century there were several good furniture manufactures located in Union City, and it was particularly well know for good dining room tables and chairs.

Some of these furniture companies eventually closed. One was located at 55 Fourth Avenue, in a solid (they don't build them like that anymore!) three story building. Some of the woodworking equipment was left in the building and many of the former employees still lived in the area.

The local electric company, Penelec, convinced MFG to set up a boat manufacturing plant in the unoccupied building. This made good sense for several reasons: (1) Union City was only 65 miles from MFG's headquarters in Ashtabula, permitting inexpensive shipment of boats hulls from Ashtabula to UC; (2) we needed to build wood transoms, seats and decks for the boat hulls and the building had most of the equipment and skilled people nearby; (3) the building was inexpensive to purchase; and (4) MFG managers could commute there from Ashtabula in about an hour. Except Bob Morrison, who made it in 45 minutes.

So, we moved in late 1954 and introduced three 15-foot models. And that is when the fiber glass boat was born. TBC.

P.S. Can you name the models? An MFG tie to you, if you can!